Product code: K.ON.10.3030.002.11
Suitable for line loads up to 3kN in accordance with BS6180.
Using the Flex-Fit System, the installation can be done from one side only and glass adjusted accordingly.
Pre drilled every 300mm and suitable for an M16 fixing.
Supplied in plain anodised aluminium in 2.5 metre lengths.Non-stock..
£650.34 Ex. VAT
Product code: K.ON.10.3030.300.11
Makes for easy installation with only straight cutting needed on sites.
Finished in an anodised aluminium.
Suitable for use with the 3030 Top Mount Channel.Non-stock item. Shipped direct from Manufacturer. Delivery usually 3-7 days...
£190.38 Ex. VAT
Product code: K.ON.10.3030.350.11
Makes for easy installation with only straight cutting needed on sites.
Finished in an anodised aluminium.
Suitable for use with the 3030 Top Mount Channel.Non-stock item. Shipped direct from Manufacturer. Delivery usually 3-7 days...
£190.38 Ex. VAT
Product code: K.ON.10.3030.400.11
Supplied as standard in an anodised aluminium finish.
Suitable for use with the 3030 Top Mount Channel.
Right Endcap also available.Non-stock item. Shipped direct from Manufacturer. Delivery usually 3-7 days...
£27.12 Ex. VAT
Product code: K.ON.10.3030.450.11
Supplied as standard in an anodised aluminium finish.
Suitable for use with the 3030 Top Mount Channel.
Left Endcap also available.Non-stock item. Shipped direct from Manufacturer. Delivery usually 3-7 days...
£27.12 Ex. VAT
Product code: K.ON.90.0502.322.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System.
For use with a glass thickness of 21.52mm.
The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular.
It allows for installation and plumbing of the glass from ..
£70.55 Ex. VAT
Product code: K.ON.90.0502.326.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System.
For use with a glass thickness of 25.52mm.
The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular.
It allows for installation and plumbing of the glass from ..
£70.55 Ex. VAT
Product code: K.ON.90.0502.332.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System.
For use with a glass thickness of 31.52mm.
The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular.
It allows for installation and plumbing of the glass from ..
£70.55 Ex. VAT
Product code: K.ON.90.7001.640.31
40mm long connecting pins for the easy alignment and installation of the main profile.
2 required per joint.Non-stock item. Shipped direct from Manufacturer. Delivery usually 3-7 days...
£11.85 Ex. VAT
Product code: K.ON.90.0100.110.00
The Flex Fit tool allows you to easily fit the flex fit clamps to the profile.
This tool allows you to adjust/plumb the glass easily from one side without marking or damaging the main profile...
£33.26 Ex. VAT
Product code: K.ON.90.0100.100.00
The combi tool is generally used for installing the fixed wedges once the glass is plumbed.
It it is also used to smoothly install the rubber gaskets without the need to continually bend down making the installation faster and neater...
£144.62 Ex. VAT
Product code: K.ON.90.8030.035.11
To suit all the 3.0kN On Level channel systems.
Supplied in plain anodised aluminium in 5 metre lengths.
This cover just clips on to the channel and allows for a cladding 2mm thick. Non-stock item. Shipped direct from Manufacturer. Delivery usually 3-7 days...
£51.62 Ex. VAT
Product code: K.ON.90.7012.012.10
This is a must have installation item for any installer.
This is a stepped wedge/shim that starts at 1mm and goes in steps up to 6.5mm thick.
Ideal for plumbing frameless balustrade tracks before glass installation to enable easier and faster glass installation and plumbing especially on singl..
£33.68 Ex. VAT
Showing 1 to 13 of 13 (1 Pages)