- Our door closer range consists of floor springs, concealed over head closers and standard overhead closers for all door types such as glass, wood, aluminium etc..
- Available in both single action and double action formats with adjustable opening forces.
- Top quality materials ensure that these closers will last the test of time with some even tested to 500000 opening cycles.
Product code: KGTS850-90
90° hold open with a medium 14.8 Spindle.
Easy installation and adjustment.
Closing Ranges. Two closing speeds variable by valve adjustment provide full hydraulic control.
Valve 1:130 degrees - 20 degrees closing speed.
Valve 2: 20 degrees - 0 degrees latching range.
Specifications:
..
£119.07 Ex. VAT
Product code: KGTS840-105
Closing Ranges: Two closing speed variable by valve adjustment provide full hydraulic control Valve 1: 130-20 degrees closing speed. Valve 2: 20-0 degrees latching range...
£112.47 Ex. VAT
Product code: KGTS840-90
Closing Ranges: Two closing speed variable by valve adjustment provide full hydraulic control Valve 1: 130-20 degrees closing speed. Valve 2: 20-0 degrees latching range.Two Adjustment Screws - One for Closing speed and the other for Latching speed.Special Retaining Rings Prevent the adjusting scre..
£112.47 Ex. VAT
Product code: KGTS840-NHO
Closing Ranges: Two closing speed variable by valve adjustment provide full hydraulic control Valve 1: 130-20 degrees closing speed. Valve 2: 20-0 degrees latching range.Two Adjustment Screws - One for Closing speed and the other for Latching speed.Special Retaining Rings Prevent the adjusting screw..
£112.47 Ex. VAT
Product code: KGTS840IN.10
..
£12.38 Ex. VAT
Product code: KGTS840IN.15
..
£13.23 Ex. VAT
Product code: KGTS840IN.20
..
£13.91 Ex. VAT
Product code: KGTS840IN.25
..
£14.56 Ex. VAT
Product code: KGTS850-NHO
Non hold open with a medium 14.8 Spindle.
Easy installation and adjustment.
Closing Ranges. Two closing speeds variable by valve adjustment provide full hydraulic control.
Valve 1:130 degrees - 20 degrees closing speed.
Valve 2: 20 degrees - 0 degrees latching range.
Specifications:
..
£119.07 Ex. VAT
Product code: KGTS850A
Type A end load arm assembly, For top rail with 1" deep recess...
£22.91 Ex. VAT
Product code: KGTS850S
Type "S" Side load arm assembly. For top rail with 12.5mm recess...
£20.75 Ex. VAT
Product code: KGTS850U
Top U Arm Channel. For Type S Side load arm fix in the upper door rail or timber door on top minimum 17mm Channel dept and 35mm Width..
£6.42 Ex. VAT
Product code: KGT100SS-HO
Easy to install and adjust hydraulic floor spring that saves the need to dig holes in floors to sink the conventional floor spring.
More economical also than the conventional floor spring as the hydraulics are built in to the patch fitting.
A top patch fitting to match in size can be bought sepera..
£114.80 Ex. VAT
Product code: KGT10SS-AUTO105
Bottom patch fitting with concealed spring for door closing. With this fitting there is now no need to dig out for traditional floor spring boxes especially in areas where underground services may be present such as underfloor heating. These are ideal for offices, internal doors or external doors ..
£211.68 Ex. VAT
Product code: KLPLSS
Overall size: 400 x 100mm.
Postal aperture size: 300 x 50mm. 304 Grade Stainles steel...
£92.61 Ex. VAT
Product code: K9143DSL
Drop forged steel, Zinc Plated with Stainless Steel Cover...
£11.92 Ex. VAT
Product code: K9143DSR
Drop forged steel, Zinc Plated with stainless steel...
£11.92 Ex. VAT
Product code: K9143TCL
Drop forged steel, Zinc plated with stainless steel cover...
£15.57 Ex. VAT
Product code: K9143TCR
Drop forged steel, Zinc Plated with Stainless Steel Cover...
£15.57 Ex. VAT
Product code: KGTS85DP
Adjustable dual-purpose bottom pivot set..
£11.33 Ex. VAT
Product code: KODC730
Suitable for left or right hand doors.
Comes standard with the elbow type arm but an alternative KODCSLC-01 sliding arm may be purchased separately...
£92.92 Ex. VAT
Product code: KODCFP-01
Suitable for use with the KODC730 overhead closer.
For use with 10mm thick glass.
Two 20mm diameter holes must be drilled in the glass for fixing...
£39.16 Ex. VAT
Product code: KODCFP-02
Suitable for use with the KODC730 overhead closer. For use with 10mm thick glass. Non drill solution...
£14.03 Ex. VAT
Product code: KODCFP-04
Suitable for use with the KODC730 overhead closer. For use with 10mm thick glass. No hole required in the glass. Used to mount the standard arm on a glass overpanel...
£9.27 Ex. VAT
Product code: KODCPB-01
Suitable for use with the KODC730 overhead closer...
£2.52 Ex. VAT
Product code: KODCSLC-01
Suitable for use with the KODC730 overhead closer. Available in hold open and non hold open options...
£12.97 Ex. VAT
Showing 1 to 30 of 30 (1 Pages)